Mixing Station Pro +48 on Aux?

  1. #1 by Anthonie Hunter on 1 Week Ago
    Anthonie Hunter's Avatar
    Posts: 260

    Mixing Station Pro +48 on Aux?

    Working with Mixing Station Pro I noticed something odd:
    There is a +48 sign above the Aux faders, suggesting you can apply Phantom power to the Aux inputs.
    Also on the Overview page of each Aux channel ther is a +48V button that suggests that.

    I can not imagine that it would be a good idea to put Phantom power on a TRS input.
    Also in X32 Edit I can not find the corresponding buttons, so I assume this is a 'not existing feature' in Mixing Station Pro.

    If so, better to remove them in a next update, to prevent confusion.
  2. #2 by Robert Lofgren on 1 Week Ago
    Robert Lofgren's Avatar
    Posts: 5,320
    An aux channelstrip can be assigned to an xlr input so the gui need the placeholder for phantom power.

    It is physically impossible to apply phantom power to the actual aux input.

    __________________________________________________ _______________________

    Check the knowledgebase at https://kb.musictri.be/mghome

    For official technical and warranty support for your product you should contact the support team through their CARE department. You can contact CARE by phone at (+1) 702-800-8290 for the US and Canada and (+44) 1562 732290 in Europe.

    You can also contact CARE support via email at CARECREA@musictribe.com. They strive to respond to emails within 24-48 hours during normal business hours, but please be patient if it takes longer due to the volume of emails they receive.


    Robert Lofgren
    Volunteer Forum Community Moderator