Must be loosing my mind on patch for FOH and Mon split - any help appreciated

  1. #1 by Davis Clapp on 2 Weeks Ago
    Davis Clapp's Avatar
    Posts: 17

    Must be loosing my mind on patch for FOH and Mon split - any help appreciated

    I am having a brain freeze here, changing a bit for a upcoming tour and needed some help on the routing patch and settings

    PHYSICAL set up

    X32 Rack for Monitors and FOH

    SR - In Case --- SD8 set for outs 1-8
    Mon 1 used SR
    Mon 2 used SR
    Mon 3
    Mon 4
    Out 5 - Matrix Mix Mono for satellites
    Out 6 - MC Sub mix on Stage R
    Out 7 /r for possible external house PAand 8 L/R on Stage Right

    Center Behind Drums --- SD 16 set for Outs 9 - 16
    Mon 9
    Mon 10
    Mon 11
    Mon 12
    Mon 13 Matrix for Side Fill
    Mon 14 Matrix for Side Fill
    Outs 15/16 L

    SL - In Case --- SD8 set for outs 1-8
    Mon 1
    Mon 2
    Mon 3 used SL
    Mon 4 used SL
    Out 5 - Matrix Mix Mono for satellites
    Out 6 - MC Sub mix on Stage R
    Out 7 /r for possible external house PA and 8 L/R on Stage Right

    All of this works fine as I have been using it BUT what I want to do is to add a a X32 CORE for a FOH mix separate from the Rack, the issue I am having is the outputs from the FOH and how to assign the routing to get back to the SD stage boxes

    As of now I can set the HOME inputs to share the inputs and using gain split to AES50 a or b depending on which I place first but I cannot get sound to pass from mix iPad to the outputs on the SD's

    What am I forgetting

    Thank you

    so again Rack 1 has
    Core FOH desired
    and
    Rack Monitors desired

    Racks 2 has SD 8 channels 1-8 and outs 1-8
    Rack 3 has SD 16 channels 9 - 24 and outs 9 - 16
    Rack 4 has SD 8 Channels 25 - 32 and outs 1 - 8