FIrmware update for IP1000

  1. #1 by Morten Mikkelsen on 10-21-2018
    Morten Mikkelsen's Avatar
    Posts: 1

    FIrmware update for IP1000

    According to Turbosound's website, there's a version 2.1 firmware update available for my newly purchased IP1000. My question is, how do I apply it? There's no USB port or other connection that I can find and it doesn't look like I can use the Turbosound app either.

    Thanks in advance
  2. #2 by Leo Dinorcia on 3 Weeks Ago
    Leo Dinorcia's Avatar
    Posts: 1

    Same Question

    I was wondering the same thing I read a post that said to connect via usb cable while power is off, hold down setup button while powering on (should say something like "waiting for update file), then run the file from a pc/laptop.
    But there is NO USB connector so I have no idea.The product is good but the documentation and support is really lacking and not much action on the forum either for information.
  3. #3 by Paul Vannatto on 3 Weeks Ago
    Paul Vannatto's Avatar
    Posts: 11,119
    Hi Leo,

    Welcome to the forum. I think there may be a misunderstanding. I was just on TurboSound's website and there are 2 different models of the iP1000 (iP1000 and iP1000 v2). But looking in their downloads section, there are no firmware updates listed.

    __________________________________________________ _______________________
    For additional help please refer to the X32 wiki pages for updated and current documentation about the X32.

    For official technical and warranty support for your product you should contact the support team through their CARE department. You can contact CARE by phone at (+1) 702-800-8290 for the US and Canada and (+44) 1562 732290 in Europe.

    You can also contact CARE via email at CARECREA@musictribe.com. They strive to respond to emails within 24-48 hours during normal business hours, but please be patient if it takes longer due to the volume of emails they receive.


    Paul Vannatto
    Volunteer Forum Community Moderator