V22 infinium

  1. #1 by Robert Ho on 08-26-2018
    Robert Ho's Avatar
    Posts: 2

    V22 infinium

    Does anyone have anyone experience hooking an hotone xtomp pedal to the either the fx loop or inline to the input? Doesn't seem like I'm getting the proper sound.
  2. #2 by Robert Lofgren on 08-26-2018
    Robert Lofgren's Avatar
    Posts: 5,320
    Test it with no fx enabled with and without the analog bypass/true bypass. This will tell you if your xtomp is working correctly.

    In general the type of fx you run dictate if you should run the pedal into the preamp or fx-loop.

    __________________________________________________ _______________________

    Check the knowledgebase at https://kb.musictri.be/mghome

    For official technical and warranty support for your product you should contact the support team through their CARE department. You can contact CARE by phone at (+1) 702-800-8290 for the US and Canada and (+44) 1562 732290 in Europe.

    You can also contact CARE support via email at CARECREA@musictribe.com. They strive to respond to emails within 24-48 hours during normal business hours, but please be patient if it takes longer due to the volume of emails they receive.


    Robert Lofgren
    Volunteer Forum Community Moderator
  3. #3 by Robert Ho on 08-31-2018
    Robert Ho's Avatar
    Posts: 2
    thanks this helps.


    - Robert Lofgren wrote View Post
    Test it with no fx enabled with and without the analog bypass/true bypass. This will tell you if your xtomp is working correctly.

    In general the type of fx you run dictate if you should run the pedal into the preamp or fx-loop.