Gain Structure on MR18 inputs

  1. #1 by Federico Canuti on 06-21-2018
    Federico Canuti's Avatar
    Posts: 20

    Gain Structure on MR18 inputs

    Do the MR18 has different gain structure or preamp settings for the XLR and balanced TRS inputs?

    My A&H has different gain settings (actually they say different preamps) if I plug in an XLR or TRS on the same channel, I just can't find this info for my MR18.

    Best regards
    Federico
  2. #2 by Robert Lofgren on 06-21-2018
    Robert Lofgren's Avatar
    Posts: 5,058
    No, the trs and xlr share the same preamp. Only the hi-z inputs on the xr18 differs in the input circuit.

    __________________________________________________ _______________________

    Check the knowledgebase at https://kb.musictri.be/mghome

    For official technical and warranty support for your product you should contact the support team through their CARE department. You can contact CARE by phone at (+1) 702-800-8290 for the US and Canada and (+44) 1562 732290 in Europe.

    You can also contact CARE support via email at CARECREA@music-group.com. They strive to respond to emails within 24-48 hours during normal business hours, but please be patient if it takes longer due to the volume of emails they receive.


    Robert Lofgren
    Volunteer Forum Community Moderator
  3. #3 by Federico Canuti on 06-21-2018
    Federico Canuti's Avatar
    Posts: 20
    Thank you!
  4. #4 by Joe Clark on 08-03-2018
    Joe Clark's Avatar
    Posts: 2
    Thanks!
  5. #5 by Craig Fowler on 08-05-2018
    Craig Fowler's Avatar
    Posts: 2,065
    As above. The reason for the difference is the A&H consoles typically have a 10dB pad on the line ins.