Ip-2000 vibration - Rattling sound. Is this normal?

  1. #1 by Iván Treviño on 05-20-2018
    Iván Treviño's Avatar
    Posts: 3

    Ip-2000 vibration - Rattling sound. Is this normal?

    Hi there, I have recently bought a IP-2000 system. Testing it with a frecuency generator at 132 Khz I found that there is noticiable an annoying "rattling" noise.

    Have anyone experienced a problem like this one? Is my unit deffective?


    Thanks for the support,
    Cheers!

    https://www.youtube.com/watch?v=I30K...ature=youtu.be

    https://www.youtube.com/watch?v=tAuz...ature=youtu.be
  2. #2 by Robert Lofgren on 05-20-2018
    Robert Lofgren's Avatar
    Posts: 5,018
    Well, if it really is 132khz then you have a severe problem.

    If it rather is 132hz then it could be that you are hearing the blow noise from the subs port. Can you describe the ratteling noise and can you determine from where it comes?

    __________________________________________________ _______________________

    Check the knowledgebase at https://kb.musictri.be/mghome

    For official technical and warranty support for your product you should contact the support team through their CARE department. You can contact CARE by phone at (+1) 702-800-8290 for the US and Canada and (+44) 1562 732290 in Europe.

    You can also contact CARE support via email at CARECREA@music-group.com. They strive to respond to emails within 24-48 hours during normal business hours, but please be patient if it takes longer due to the volume of emails they receive.


    Robert Lofgren
    Volunteer Forum Community Moderator
  3. #3 by Iván Treviño on 05-21-2018
    Iván Treviño's Avatar
    Posts: 3
    - Robert Lofgren wrote View Post
    Well, if it really is 132khz then you have a severe problem.

    If it rather is 132hz then it could be that you are hearing the blow noise from the subs port. Can you describe the ratteling noise and can you determine from where it comes?
    Hi Robert, thanks for your response. Have You seen the videos? It Is a noise that comes from the colum A. It dissapears if I put my hand on the column.

    In addition to this, I had softened the vibration of the base of the columns with an adhesive Rubber...