MIDAS M32 firmware upgrade

  1. #1 by Roland Tsui on 01-30-2018
    Roland Tsui's Avatar
    Posts: 2

    MIDAS M32 firmware upgrade

    I have a Midas M32 with the firmware version 2.16. Can I just upgrade to 3.08 directly? Or I need to upgrade step by step from 2.16 to 3.0 to 3.0 to 3.07 and then 3.08?

    And, is the new KT DN32-Dante card can be used with the M32 in version 2.16?

    Moreover, what does it mean in the 3.08 release-note "fader board firmware update disabled (replaced by standalone updater)"? If I need upgrade it, where I can find this fader updater?

    Thanks a lot!

  2. #2 by Paul Vannatto on 01-30-2018
    Paul Vannatto's Avatar
    Posts: 10,522
    Hi Roland,

    Welcome to the forum. You can go directly to the latest firmware (3.08). I would highly recommend that you do, since it seems to be rock solid.

    Regarding the KT DN32-Dante, I can't be for certain whether 2.16 will work with this card or not. Again highly recommend that you update the firmware to 3.08 anyways.

    I believe the "fader board" that it references is the X-Touch which now has its own firmware update routine.

    __________________________________________________ _______________________
    For additional help please refer to the X32 wiki pages for updated and current documentation about the X32.

    For official technical and warranty support for your product you should contact the support team through their CARE department. You can contact CARE by phone at (+1) 702-800-8290 for the US and Canada and (+44) 1562 732290 in Europe.

    You can also contact CARE via email at CARECREA@musictribe.com. They strive to respond to emails within 24-48 hours during normal business hours, but please be patient if it takes longer due to the volume of emails they receive.

    Paul Vannatto
    Volunteer Forum Community Moderator
  3. #3 by Roland Tsui on 01-30-2018
    Roland Tsui's Avatar
    Posts: 2
    Many thanks Paul!