connect 2 Inuke amps at remote software

  1. #1 by Bert van Rietschoten on 12-07-2017
    Bert van Rietschoten's Avatar
    Posts: 1

    connect 2 Inuke amps at remote software

    Hi, I have 1 I-nuke 3000 DSP for my tops en 1 i-nuke 6000 DSP subs, is it possible to connect both amps at the same time to the Remote connect software?

    Bert: confused:
  2. #2 by Michael Lapke on 12-12-2017
    Michael Lapke's Avatar
    Posts: 1,694
    - Bert van Rietschoten wrote View Post
    Hi, I have 1 I-nuke 3000 DSP for my tops en 1 i-nuke 6000 DSP subs, is it possible to connect both amps at the same time to the Remote connect software?

    Bert: confused:
    Hi Bert, welcome to the forum!

    To answer your question no it's not possible to connect more than one iNUKE Amp to a PC device using the remote control software at the time. If you need to make adjustments to both then you will need to do that individually, one at a time by connecting to your control device.

    Hope that helps!

    Michael Lapke
    Specialist, Community
    MUSIC Tribe
    BEHRINGER
  3. #3 by Arjen Aalbers on 05-10-2018
    Arjen Aalbers's Avatar
    Posts: 1

    control more then one i-nuke amplifiers with the software, network based.

    I have find out a workaround to control several i-nuke amplifiers with the control software.
    On my window 7 pc a have installed an Belkin USB -network hub. When properly installed, the software functions as a virtual USB port. And it works fine. if you plug in more then one I-Nukes (max 5 at this Belkin) you can switch on and of the USB outputs remotely.
    So what i do, i connect both i-nukes tot the Belkin and run the belkin software. Two devices are detected. i now can switch the desired USB port on. When i run the i-nuke software, the I-nuke with the enabled USB port (for example No.1) on, the Belkin can be controlled. When i switch the USB port 1 of and 2 on, i do a reconnect at the I-nuke software and can controll the other i-nuke (2).

    It works like a charm, fast en flawless. And the best thing is, it is network controlled.
  4. #4 by Paul Vannatto on 05-10-2018
    Paul Vannatto's Avatar
    Posts: 10,265
    Hi Arjen,

    Welcome to the forum. Is the unit you describe this one?
    https://www.amazon.com/Belkin-F5L009.../dp/B000QSN3O6

    __________________________________________________ _______________________
    For additional help please refer to the X32 wiki pages for updated and current documentation about the X32.

    For official technical and warranty support for your product you should contact the support team through their CARE department. You can contact CARE by phone at (+1) 702-800-8290 for the US and Canada and (+44) 1562 732290 in Europe.

    You can also contact CARE via email at CARECREA@music-group.com. They strive to respond to emails within 24-48 hours during normal business hours, but please be patient if it takes longer due to the volume of emails they receive.


    Paul Vannatto
    Volunteer Forum Community Moderator