1. Search
    Last Post
    Replies
    Views
  2. 11 Hours Ago
    121
    21,359

    You are most welcome Andrew. I also added that...

    You are most welcome Andrew. I also added that link to post #17 where I have some of the others.
  3. 15 Hours Ago
    121
    21,359

    Hi Andrew, Here is the print file for a 40 mm...

    Hi Andrew,

    Here is the print file for a 40 mm offset (deep) and 50 mm hole.
    https://drive.google.com/file/d/12NVU1kDlszSyZMeRHJd_DMYUVcVERPsd/view?usp=sharing
  4. 17 Hours Ago
    121
    21,359

    Hi Andrew, Welcome to the forum. Glad to hear...

    Hi Andrew,

    Welcome to the forum. Glad to hear that you found those 3D printed rack ear files. Actually the one that Pat printed out (post # 113) has a 30mm recess (IMC) and those holes should be...
  5. 1 Day Ago
    13
    145

    Oops! I didn't read far enough down the page....

    Oops! I didn't read far enough down the page. Glad Craig got you the answer.
  6. Glad to hear Anton. As long as it isn't a wanted...

    Glad to hear Anton. As long as it isn't a wanted poster, you should be all set :D
  7. 1 Day Ago
    13
    145

    Hey Steve, that Lynx AES16e-50 card is configured...

    Hey Steve, that Lynx AES16e-50 card is configured to receive 16 mono channels of AES/EBU, not AES50 (see here).
  8. 1 Day Ago
    1
    32

    Hi Daniel, Welcome to the forum. Unfortunately...

    Hi Daniel,

    Welcome to the forum. Unfortunately that email address is no longer valid for CARE. See my signature below for current contact info.
  9. 1 Day Ago
    2
    34

    Hi Dean, Welcome to the forum. Here...

    Hi Dean,

    Welcome to the forum. Here is the midi listing on the wiki.
  10. Hi Preston, Welcome to the forum....

    Hi Preston,

    Welcome to the forum. Unfortunately your suggestion will not work for the OP needs. Those taps you refer to (in the Routing section) affects outputs, not channel sends. For example if...
  11. Hi Shawn, Welcome to the forum. You mentioned...

    Hi Shawn,

    Welcome to the forum. You mentioned that you have connected your HP Spectre X360 Laptop to the XR18 via USB cable. That will allow the audio to transfer from the laptop to the console...
  12. 1 Day Ago
    3
    81

    Hi Andy, Welcome to the forum. The short...

    Hi Andy,

    Welcome to the forum. The short answer to your question is - absolutely nothing. The LR Main Stereo button on each channel strip enables or disables the signals going to the LR bus. That...
  13. Have you looked at one of Magix apps such as...

    Have you looked at one of Magix apps such as Movie Edit Pro? I had an older version of Premiere Elements that I tried to use a few years ago (for a church video that they asked me to edit). But it...
  14. Hi Mark, The Reaper registration is (and...

    Hi Mark,

    The Reaper registration is (and always has been) on the honor system. I have used it beyond the 60 days before getting around to registering it (and paying the $60 US). During the...
  15. That is correct Samuel. I would also recommend...

    That is correct Samuel. I would also recommend that you save (backup) those snapshots to your PC (as scene files). I'm a firm believer in Murphy's Law...
  16. Hey Bill, it would be far easier for Gary (or...

    Hey Bill, it would be far easier for Gary (or anyone) to verify/troubleshoot if he had your scene file. Here are the instructions to upload your scene file.
  17. The short answer is location. Snapshots are saved...

    The short answer is location. Snapshots are saved and loaded on/from the X-Air console and scenes are saved and loaded on/from the device (iPad, android tablet, laptop, desktop, etc.). Other than...
  18. Hi Benoit, Welcome to the forum. Phantom power...

    Hi Benoit,

    Welcome to the forum. Phantom power is only applied to the XLR input jacks on the back of the X32. If you have your 3.5 mm cable from your computer plugged into one of the 6.5 mm or RCA...
  19. 3 Days Ago
    22
    1,516

    Hi Cal, Welcome to the forum. I'm not aware of...

    Hi Cal,

    Welcome to the forum. I'm not aware of any specific forum, but I have kept the documentation up to date for each release. All of my apps do not require an installation. Simply unzip the...
  20. Hi Maurits, Welcome to the forum. You have a...

    Hi Maurits,

    Welcome to the forum. You have a very interesting scenario that an X32 eco-system can indeed handle. I'll try and answer your questions as best as I can.


    Yes it is indeed...
  21. 5 Days Ago
    25
    378

    The only thing that matters is that the console...

    The only thing that matters is that the console that is master clock and controls the DL32 headamps must be connected to the DL32 A port.
  22. Hi Jiri, Try using the NX Series Edit...

    Hi Jiri,

    Try using the NX Series Edit. It looks very similar. The NX amps are the new replacements of the iNuke.
  23. Sticky: Hi Scott, Assuming you have the AES50 cable...

    Hi Scott,

    Assuming you have the AES50 cable plugged into the X32 Rack A port, here is the routing.

    Routing, home (inputs)
    Record Mode
    * Inputs 1-8 -> Local 1-8
    * Inputs 9-16 -> AES50 A1-8
    ...
  24. 6 Days Ago
    27
    395

    If you are meaning the X32-Edit app, the left set...

    If you are meaning the X32-Edit app, the left set of cues/scenes/snippets are those located on your computer. The right set are those located in the console itself.
  25. 6 Days Ago
    25
    378

    Wonderful to hear Bart. So it was the master...

    Wonderful to hear Bart. So it was the master clock conflict after all.
  26. 6 Days Ago
    27
    395

    Yes Steve. Setup, config, Confirm Pop-ups ->...

    Yes Steve. Setup, config, Confirm Pop-ups -> unselect Scene Load