1. Search
    Last Post
    Replies
    Views
  2. 06-10-2018
    7
    283

    Hi David! Are you using a Mac? If yes, then you...

    Hi David!
    Are you using a Mac?
    If yes, then you may see your track files with a "._" in front of the name. That is NOT your file, just a reference file that macOS makes. You'll need to keep...
  3. 03-24-2018
    3
    214

    Sorry, I don't have a solution for you. But you...

    Sorry, I don't have a solution for you. But you bring up a good point, so I wanted to bump and follow the thread lol :)
  4. Check out Ian's excellent VK editor app at...

    Check out Ian's excellent VK editor app at voiceliveditor.com
  5. JR, you get guitar FX ONLY from the XLR output....

    JR, you get guitar FX ONLY from the XLR output. The 1/4" is a "through" without FX.
  6. For God's sake, make sure you turn RoomSense OFF...

    For God's sake, make sure you turn RoomSense OFF if you're gonna connect HP out to the PA system!
  7. 11-07-2017
    2
    331

    Hi Tahiche Yes it doesn't work through USB. It's...

    Hi Tahiche
    Yes it doesn't work through USB. It's only intended for tempo syncing, I think.
    And MIDI CC messages. You're wanting to loop...drum sounds and stuff? Use the Aux.
  8. 11-06-2017
    2
    287

    Hi Robert In addition to what Craig wrote, try...

    Hi Robert
    In addition to what Craig wrote, try turning down the mic gain a little bit. When harmonies are enabled, the vocal output essentially doubles or triples.
    You could probably turn down the...
  9. Hi Kirsten I use the play electric OFTEN, and I...

    Hi Kirsten
    I use the play electric OFTEN, and I bought it AS SOON as it came out.
    I simply love it. I have experienced the popping, it seems to occur if you are using guitar delay
    and the output...
  10. 11-06-2017
    4
    280

    Hi Tobias. Yes, the choice is yours. With the...

    Hi Tobias.
    Yes, the choice is yours.
    With the Switch-6 you can for example control the looper and be able to turn on and off 3-4 fx while looping. There are a few things that can only be reached...
  11. 11-05-2017
    3
    217

    Hi Barney If it stops before the guitar rings...

    Hi Barney
    If it stops before the guitar rings out, you could try lowering the noise gate setting. It's in the SETUP menu in the GUITAR tab.
    I THINK that may be "it".
    In addition to that...it may...
  12. Hi Marcos A headphone splitter cable from your...

    Hi Marcos
    A headphone splitter cable from your metronome device sounds like the easiest idea.

    But I'm guessing that you'd also want to hear each other in the headphones...am I right?...
  13. Hi Joel No, that's not what it means. Roomsense...

    Hi Joel
    No, that's not what it means.
    Roomsense is ONLY active from the Roomsense mics in your GTX.
    The XLR in will NOT listen for key/scale info at all. Only from the instrument in, or the...
  14. Hi Jordan! I use a Bose L1 MII, have been for 10...

    Hi Jordan!
    I use a Bose L1 MII, have been for 10 years.
    Unless you are using the Bose T1 mixer, you can play right into any input. Are you using the L1 Classic, with several inputs on the power...
  15. Hi Loren! You did not mention what other...

    Hi Loren!
    You did not mention what other instruments are in the band.

    1) If you are using a mixer with Aux or monitor outputs, run a cable from it with instruments that make chords only, into the...
  16. 07-22-2017
    5
    602

    Hi Brandon The guys are correct. Your recording...

    Hi Brandon
    The guys are correct.
    Your recording app can (most likely) only use ONE interface at a time. The VLP is a recording interface unless you use the XLR outs. If you have both plugged in at...
  17. 07-21-2017
    4
    515

    Hi Chris. In the AudioMIDI setup utility on my...

    Hi Chris.
    In the AudioMIDI setup utility on my Mac, this is what I get: https://www.dropbox.com/s/hjz76heuv39z3o9/Screenshot%202017-07-21%2016.32.38.png?dl=0

    In Logic, I get Channel 1&2 audio...
  18. 06-20-2017
    1
    197

    Hi Frederic. When my VL3X is set ti LINE, I have...

    Hi Frederic.
    When my VL3X is set ti LINE, I have to turn the output down to -8dB or more, so it won't overload my mixer. I find it to be anything but weak.
    Just asking...what are your input levels...
  19. Pieter, in addition to what Spencer said, the...

    Pieter, in addition to what Spencer said, the Play Electric is happy to accommodate pretty much any input signal you throw at it.
    I have not encountered the click you mention.
  20. 06-20-2017
    4
    1,115

    Roomsense would not cause feedback unless you are...

    Roomsense would not cause feedback unless you are running something out the headphones output into the PA, as it does not go out through the main outputs.

    That said, plug a dummy cable (not...
  21. 04-05-2017
    2
    413

    Even easier, is VOCAL fx menu->HardTune->and...

    Even easier, is VOCAL fx menu->HardTune->and choose the first style.
    And unlike the global pitch correction, you can assign a button to turn it on and off!
  22. Yes, it IS safe to use! Ian (the developer) is...

    Yes, it IS safe to use!
    Ian (the developer) is very security-minded, so you will not have any issues with the download or with the app. He is also quite active here in the forums.
  23. Yep, with VoiceSupport, you can swap presets, if...

    Yep, with VoiceSupport, you can swap presets, if you so desire.

    A better idea is to chose a empty slot. I typically start around 300, copy, paste and edit presets.
    If you then fav them and choose...
  24. Hey. No replies, huh? I'm sorry for missing...

    Hey.
    No replies, huh? I'm sorry for missing this.
    You should get a nice boost if you switch the output of the VL3 from Mic level to Line level.
    Press the SETUP button. Navigate to OUTPUT. On the...
  25. Hi John Sorry, that is not possible, AFAIK. I...

    Hi John
    Sorry, that is not possible, AFAIK.
    I switch all the time, but I run straight to mixer without going through amp.
  26. Hi Karen! YES! The backing tracks that you have...

    Hi Karen!
    YES!
    The backing tracks that you have uploaded to your VL3X will help generate harmonies!
    So you can stop playing and just sing, if you want.

    :)