1. Search
    Last Post
    Replies
    Views
  2. Upload your scene file so we can double check...

    Upload your scene file so we can double check routing, stereo-linking and tap points etc. How is the drummer connecting IEMs to the console? If the guitars (which are panned) are working but the...
  3. What Paul said will work (and won't require you...

    What Paul said will work (and won't require you to set the AuxIn Remap to Card1-2,) however it means that you're essentially using the console as passthrough, which means 0 dsp\level control for the...
  4. Sticky: It's important to differentiate between preamps,...

    It's important to differentiate between preamps, inputs, and channels. In some cases they're all routed 1:1:1, and ch1 is effectively the signal from preamp1. In other cases, like when you tell a...
  5. Physical eq band selection buttons in the...

    Physical eq band selection buttons in the console's channel strip. 6 eq bands, only 4 buttons.
  6. Don't forget you have to press the Low+LowMid eq...

    Don't forget you have to press the Low+LowMid eq band buttons together to select the low-low eq, and the MidHi+Hi band buttons together to select the hi-hi band.
  7. I don't think so. There are certain functions...

    I don't think so. There are certain functions which will result in the button's LED being illuminated (eg tap tempo, mute, jumping to a particular page, selecting a particular channel etc) but AFAIK...
  8. 6 Days Ago
    4
    107

    You'd run Mics>DL32>M32. M32 contains the dante...

    You'd run Mics>DL32>M32. M32 contains the dante card, specifically the DN32-DANTE. Ethernet from the Dante card runs into your Protools machine. Use DVS + Controller to set up the channel mapping...
  9. 1 Week Ago
    3
    94

    You can get 8+1FX (16 buses + M\C used to feed FX...

    You can get 8+1FX (16 buses + M\C used to feed FX engine.)

    If only using the console for monitors, you could use the LR bus as another stereo mix (bus1-14 for 7x IEMs, LR for the 8th IEM, bus...
  10. 1 Week Ago
    4
    107

    Yes, Dante can work that way. However (one of)...

    Yes, Dante can work that way. However (one of) its biggest strengths is that it allows inter-connectivity between different kinds of consoles. Given you're using an M32 and X32, you could ignore...
  11. Yes. Each bus (1-16, LR, M\C and Mtx1-6) have...

    Yes. Each bus (1-16, LR, M\C and Mtx1-6) have their own dedicated 6-band peq (and compressor.) They all also have an insert point, into which you can insert a 31-band geq from the FX rack (or...
  12. If the ch>bus send taps really are pre-eq, that...

    If the ch>bus send taps really are pre-eq, that shouldn't be happening. Upload your scene file (instructions here) so we can double check.
  13. 1 Week Ago
    3
    137

    I'll just add that the M\C bus can also be used...

    I'll just add that the M\C bus can also be used to feed an FX engine if you run out of buses in the 13-16 range.

    Also, re bus1-16 appearing on the LHS of the console, if you have the 4th layer...
  14. And if you're on the console, go to a bus layer,...

    And if you're on the console, go to a bus layer, select the bus, config tab, 3rd encoder, turn to select the tap point, push to confirm. Keep in mind that when you change the tap point you'll reset...
  15. The XR18 can do USB\Mic switching on a single...

    The XR18 can do USB\Mic switching on a single channel basis, so there's a button for each channel. The X32 works in blocks-of-8, so you have to switch 8 channels at a time from mic to USB (unless...
  16. 2 Weeks Ago
    4
    294

    As above. The reason for the difference is the...

    As above. The reason for the difference is the A&H consoles typically have a 10dB pad on the line ins.
  17. 2 Weeks Ago
    4
    125

    Snippets (or DCA mutes so you don't have to...

    Snippets (or DCA mutes so you don't have to switch layers) on user-assign keys.
  18. 2 Weeks Ago
    2
    107

    2-track playback from the USB-A socket on the...

    2-track playback from the USB-A socket on the front of the mixer.
  19. It's possible to use the Core as a passthrough...

    It's possible to use the Core as a passthrough when things are going well, then to change to mix when the Compact messes up, and yes it can be done with scenes.

    Routing the audio is the easy bit. ...
  20. 2 Weeks Ago
    4
    125

    The mute will mute the channel everywhere;...

    The mute will mute the channel everywhere; monitors and mains. 2 solutions:

    Assign the pastor's mic to a DCA, mute the DCA . This will mute the channel's post-fader sends (send to LR, and post...
  21. (Assuming the SD8 is connected to the Core's...

    (Assuming the SD8 is connected to the Core's AES50-A socket, and the output switch on the side of the SD8 is set to "Out1-8.")

    Routing>Out1-16
    Output8: Mtx1, Post Fader

    Routing>AES50-A...
  22. 2 Weeks Ago
    226
    47,538

    Sticky: You know you can set FX1-4 to act as inserts...

    You know you can set FX1-4 to act as inserts instead of side-chains, set them up as Combinators, and insert them across whatever channel\bus you want...
  23. For the video feed to be it's own mix, I assume...

    For the video feed to be it's own mix, I assume that means you want it pre-fader (like the monitor buses.) Given that the X32 does bus send tap points in pairs, I'd set up the following.

    Bus1-12:...
  24. Why would you need 3 more XLR outs? 6x TRS...

    Why would you need 3 more XLR outs? 6x TRS (mono) aux outs on the rack = 3x stereo pairs, +1x (stereo, though unbalanced) headphone out from the rack = a total of 4x stereo pairs. You need 1 more...
  25. Yep. Can be done. Speaker 1,2,3 plugged into...

    Yep. Can be done.

    Speaker 1,2,3 plugged into console's XLR outputs 6,7,8, toggling on the first use-assign button (referenced as button5 in the OSC protocol, as 1-4 are the encoders, which aren't...
  26. 3 Weeks Ago
    8
    300

    They're linked by default, which is useful for...

    They're linked by default, which is useful for maintaining a stereo output. If you want you can un-link them by selecting the return, going to either the "Channel" or "Config" tab at the top of the...