1. Search
    Last Post
    Replies
    Views
  2. 20 Hours Ago
    13
    163

    Correct. The first 6 rows of that table detail...

    Correct. The first 6 rows of that table detail which signals will be leaving the X32 console on its A socket, the last 6 rows of that table detail which signals will be leaving the X32 console on...
  3. 1 Day Ago
    13
    163

    (Assuming you're using the AES50-A socket on the...

    (Assuming you're using the AES50-A socket on the console to connect to the Lynx Card)

    Routing>AES50A
    Output1-8: Local1-8
    Output9-16: Local9-16
    OUtput17-32: Whatever other signals you've got...
  4. 1 Day Ago
    13
    163

    The -50 version of the card will do 32 channels. ...

    The -50 version of the card will do 32 channels. As for routing you'd just make the AES50A\B socket outputs the same as the cardout tab. That will tap signals straight after the ADC. If you want...
  5. That's fine.

    That's fine.
  6. Correct. Each console is limited to its own 16...

    Correct.

    Each console is limited to its own 16 buses. Although you could use both consoles (potentially 32 buses) for monitors and pass all those bus signals to the stage for output, you'll need...
  7. 1: Yes, although IME tablets don't like running...

    1: Yes, although IME tablets don't like running multiple instances of the same app. If using Android there is a workaround to make a copy of the app and rename it, then you run one instance of each...
  8. In that setup the M32 will have control of the...

    In that setup the M32 will have control of the DL16's preamps, because it's plugged in directly to the DL16. The X32 will just have a -+18dB digital trim at the top of its channels.

    However, if...
  9. It really depends on how you've got the system...

    It really depends on how you've got the system set up and the rest of your routing.

    If all I knew was you had a full size X32 for FOH, a Rack for monitors, and an S32, I'd be connecting...
  10. Card out 1-8 set to Aux1-6/M, AuxIn Remap set to...

    Card out 1-8 set to Aux1-6/M, AuxIn Remap set to Card1-2, LR insert point set to Aux1-2, Audio software set to input on USB In 1-2 and output on USB Out1-2. No need for the RME.
  11. 1 Week Ago
    7
    202

    Not sure off the top of my head; you'd need to...

    Not sure off the top of my head; you'd need to read the specs sheet for the individual mixer to be certain. As a general rule I'd say that if the inputs are RCA they're probably expecting a -10dB...
  12. Ch17-22 are all panned L\R (odd\even) in the...

    Ch17-22 are all panned L\R (odd\even) in the bus1-2 send. It implies that at one stage these channels were stereo-linked, so the sends were panned, then they've been un-linked, but instead of...
  13. Yes. If it's an XR18, you need to go to the...

    Yes. If it's an XR18, you need to go to the In\Out button at the top of the page, then to the "USB Sends" tab. Then you need to stage 2 of the 18 USB outputs as MainL and MainR, at whatever tap...
  14. 1: Using the XR18's buses, patched to output...

    1: Using the XR18's buses, patched to output sockets on the XR18, then fed to the 01V's inputs.

    2: Yes. You can use the headphone socket if you want, or you can use the aux outs to feed a...
  15. If whoever is mixing monitors doesn't touch the...

    If whoever is mixing monitors doesn't touch the input trim, then no, FOH wouldn't notice. However there are still 3 potential problems:

    The FOH operator is stuck with the level (particularly the...
  16. What Spence said. The electronic components...

    What Spence said.

    The electronic components inside the mixer are designed and manufactured to work best when the signals running through them are at a specific voltage (what we call "line level,"...
  17. Those 21 signals listed back on page2 of the...

    Those 21 signals listed back on page2 of the thread will fit into the X32 Rack's IO, providing that the keys and trax go into the AuxIns. These sockets are TRS, so if they're being fed from the ART...
  18. Also, you can route the buses of one Rack to the...

    Also, you can route the buses of one Rack to the analogue outputs of the other Rack.
    eg 6x stereo IEMs takes 12 buses on 1 Rack, but that Rack doesn't have 12x XLR outs. You route 8 of those buses...
  19. I just mentioned the SD8 as a source for more...

    I just mentioned the SD8 as a source for more preamps, as the input list exceeded 16 preamps the Rack has (ignoring the TB preamp, as using it for an input channel burns a bus and\or FX 1-4.) It's...
  20. Paul is probably typing as I type. 1.) Sort...

    Paul is probably typing as I type.

    1.) Sort of. Although you can connect lots of preamps to the mixer, it only has the capacity to mix 38 channels (32 with full processing +6 with limited...
  21. Hmm.. No console connected, scribble strip...

    Hmm.. No console connected, scribble strip changes in Edit 2.5, but not in Edit 3.2.
  22. There's a "use master fader" option in the...

    There's a "use master fader" option in the Monitor section of the console. Not really useful if you're mixing FOH and want the PA on a fader, but can be useful if you're mixing monitors or in a...
  23. 2 Weeks Ago
    11
    259

    The short answer is "it depends." A longer...

    The short answer is "it depends."

    A longer answer is as follows.

    The B1 has a hotter output, so in theory you won't have to crank the preamp gain as much to get levels up to -18dBFS. The thing...
  24. 2 Weeks Ago
    11
    259

    As above. The difference between a close-micd...

    As above. The difference between a close-micd snare or e-gtr cab with a high SPL vs an acoustic gtr 6 away (remember the inverse square law) would account for the ~15dB increase in preamp gain...
  25. They don't do the same thing. Ok, they're both...

    They don't do the same thing. Ok, they're both 16x8 AES50 stageboxes, but that's where the similarities end.

    S16:
    Can act as clock master
    2x8ch ADAT outputs
    Single UNpowered ultranet output...
  26. Kevin, Paul, and Spence have pretty much covered...

    Kevin, Paul, and Spence have pretty much covered everything. I'll just add +1s to a few points.

    Use a double-conversion UPS instead of just a power conditioner. Although a power conditioner will...